What measures can be taken to prevent oil leakage from bearing housings?
Time:Mar 25th, 2026
Pageviews:0
Share:
To prevent oil leakage from bearing housings, the following measures can be taken: If the bearing housing lacks an oil return groove, it should be installed promptly to ensure smooth oil return;
If the oil return groove is blocked, it should be cleared immediately to ensure unobstructed oil return; check the position of the oil return groove to ensure it is at the lowest point;
Control the oil level to avoid exceeding the maximum oil line, ideally maintaining it near the middle line;
Install an oil baffle ring to reduce oil splashing; monitor the status of the vent plug, clearing any blockages to prevent excessive pressure inside the housing from causing oil leakage.
Next :
