XINXIANG SIMO BLOWER LIMITED COMPANY

Description

Energy saving centrifugal fans for industrial boiler, which is designed as the special of industrial boiler of SIMO BLOWER, can adjust the air capacity. It is suitable for conveying variousgas and materials at normal temperature or high temperature. Energy saving centrifugal fans for industrial boiler are most frequently used in: industrial kilns blowing air and inducing air, delivery of general air, high-temperature air, combustible gas and corrosive gas. At the same time, updating the material, this centrifugal fan can be also used in clinker cooler system, Materials ventilating and drying, rapid Cooling and heat dissipation, Industrial dust collector, cement line, steel factory, Power generation.

 
Characteristic
1. Can work in higher temperature condition stably, and output larger air flow volume on condition of meeting the pressure's requirement, low noise.
2. Regarding to material of impeller and main shaft, we will choose high strength carbon steel, low alloyed steel.
3. Blades angle going through optimizing design, higher wear resistant, longer service life.
4. Can flexibly adjust fan's volume and pressure in running by air damper. 
5. Fan system which impeller's diameter below 1400mm, is not needed to match bearing cooling device, can reduce the customer's cost and maintenance work.
6. Impeller of annealing treatment, completely eliminating structure of internal stress when welding, ensuring impeller  appearance won't occur creepage and flaw.
Specification

Application

Temperature

Normal temperature Air

Hot Air

Air composition

Clean air

Dusty air

Corrosive gas

Combustible gas

Powder materials

Light particle materials

Performance

Impeller diameter

400-3000

mm

Speed of mainshaft

≤4000

rpm

Pressure range

615-8302

Pa

Flow range

10696-952530

m3/h

Structure

Blade

Backward

Impeller Support

SWSI (Single Width, Single Inlet), Impeller overhung.

Drivetrain

Coupling drivetrain

Can assign

Lubrication

Oil bath lubrication

Can assign

Bearing cooling

Air cooling or Circulating Water cooling

System
configuration

Motor

SIEMENS, ABB, SIMO, LA…

Can assign

Impeller

Carbon steel

Impeller cone (Air Inlet)

Carbon steel

Case

Carbon steel

Air damper

Carbon steel

Main shaft

High-strength carbon structural steel

Bearing

FAG, SKF, ZWZ, C&U…

Bearing housing

Cast iron

 

Drivetrain

Coupling

Can assign

Foundation bolt

Carbon steel

 

Optional
components

System base frame, Protective screening,
Silencer, Inlet & Outlet pipeline compensator,
Inlet & Outlet flange, Damper, Electric actuator,
Shock isolator, Diaphragm coupling, Fluid coupling,
Motor rain cover, Temperature sensor, Vibrating sensor,
Soft starter, Inverter, Special Electrical Motor,
System monitoring Instrument,
Lube system, Overhead lube tank.

 

Related Products
INQUIRY